Single-port 10/100/1000Mbps 120W Wall Mount Over Ethernet Adapter POE Injector
It is a single port, wide-temperature, high power PoE Injector, output 48VDC, 120W for remote PDs over full 4 paris, transmission rate 10/100/1000Mbps. LNK-PSE1201G provides power for IEEE802.3af/at/bt, PoH standard terminal devices, such as high power stations, outdoor wireless AP, outdoor IP cameras.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Dongguan KaiWin Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of single-port 10/100/1000mbps 120w wall mount over ethernet adapter poe injector in China. If you're going to buy bulk high quality products at low price, welcome to get quotation from our factory. Customized orders are welcome.
Description:
It is a single port, wide-temperature, high power PoE Injector, output 48VDC, 120W for remote PDs over full 4 paris, transmission rate 10/100/1000Mbps. LNK-PSE1201G provides power for IEEE802.3af/at/bt, PoH standard terminal devices, such as high power stations, outdoor wireless AP, outdoor IP cameras. LNK-PSE1201G is designed for working temperature during -10 to 40℃, with the input voltage 100-240VAC. A detection chip inside, it will do detection PDs before power. The better work distance is 100m, it special suitable for complex power situations.
Product parameters of 120W Wall Mount over Ethernet Adapter POE Injector:
|
Output |
Safe type |
GRT-POE60-XXXYYYA |
GRT-POE60-XXXYYYA |
GRT-POE60-XXXYYYA-BT |
|
|
Voltage range |
48~56VDC |
48~56VDC |
48~56VDC |
|
|
|
Maximum power |
75W |
90W |
90W |
|
|
|
speed |
Gbps |
Gbps |
Gbps |
|
|
|
IEEE802.3 |
Non-standard, no active detection |
Non-standard, no active detection |
Standard, active detection of 802.3BT |
|
|
|
Voltage accuracy |
±5.0% |
±5.0% |
±5.0% |
±3.0% |
|
|
Linear adjustment rate |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
|
|
Load adjustment rate |
±5.0% |
±3.0% |
±3.0% |
±2.0% |
|
|
Start, rise, hold time |
2000ms, 50ms, 10ms /230VAC |
||||
|
Input |
Voltage range |
90 ~ 264VAC |
|||
|
Frequency range |
47 ~ 63Hz |
||||
|
efficiency |
87% |
87% |
87% |
87% |
|
|
Alternating current |
0.8A / 115VAC 0.4A / 230VAC |
||||
|
Inrush current max. |
Cold start 40A / 115VAC 75A / 230VAC |
||||
|
Leakage current max. |
0.25mA / 240VAC |
||||
|
Protect |
Excess load |
120%~180% of rated output power |
|||
|
Protection mode: burp mode, automatically recovered after load anomalies are removed |
|||||
|
overvoltage |
110%~140% of the rated output voltage |
||||
|
Turn off the output voltage and restart to restore |
|||||
|
Environment |
Operating temperature |
-10 ~ +50℃ (Please refer to "Decrement curve") |
|||
|
operating humidity |
20 ~ 90% RH, non-condensing |
||||
|
Store temperature and humidity |
-20 ~ +85℃, 10 ~ 95% RH, non-condensing |
||||
|
Temperature coefficient |
±0.03% /℃ (0 ~ 40℃) |
||||
|
Vibration resistance |
10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each |
||||
|
Safety and electromagnetic compatibility |
Safety specification |
passed GB4943 , GB4706, IEC61558,EN61000-3 |
|||
|
Withstand voltage |
I/P-O/P: 3000VAC |
||||
|
Insulation impedance |
I/P-O/P:10M Ohms / 500VDC / 25℃/ 70% RH |
||||
|
Electromagnetic compatibility generator shoot |
Parameter |
Standard |
Test Level / Note |
||
|
Conducted emission |
GB17625.1,EN55032 |
Class B |
|||
|
Radiated emission |
GB/T-9254, EN55024, GB4343, FCC Part 15 |
Class B |
|||
|
Others |
quality guanrantee period |
2 years |
|||
|
MTBF |
≥45000 hours |
||||
Features of 120W Wall Mount over Ethernet Adapter POE Injector:
Up to 120W of PoE Power over 4-pairs.
PoH (802.3bt), IEEE802.3at and 802.3af compliant.
Supports 10/100/1000M LAN environment.
Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.)
Plug & Play installation.
Data and power passed by the Ethernet cable.
Full protection: overload/overcurrent/over-voltage/short circuit.
100% full burn-in testing, strictly inspect and control during production.
Application of 120W Wall Mount over Ethernet Adapter POE Injector:
IP phone, VoIP phone, wireless networks access points, IP print servers, Bluetooth access points, security cameras, the smart door system.
Hot Tags: single-port 10/100/1000mbps 120w wall mount over ethernet adapter poe injector, China, manufacturers, suppliers, factory, customized, free sample, made in China
