US Plug DC24W POE (Power Over Ethernet) Injector
This is US plug DC POE (Power Over Ethernet) Injector 24W Wall Plug POE Switch for CCTV POE IP Cam Power Power OutPut Max 24W 100/1000Gabits Specification 1. Carrier Class Power over Ethernet system 2.Auto ranging power supply/ inserter 3. Built-in Ethernet surge protection to prevent equipment...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Dongguan KaiWin Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of us plug dc24w poe (power over ethernet) injector in China. If you're going to buy bulk high quality products at low price, welcome to get quotation from our factory. Customized orders are welcome.
This is US plug DC POE (Power Over Ethernet) Injector 24W Wall Plug POE Switch for CCTV POE IP Cam Power Power OutPut Max 24W 100/1000Gabits
Specification
1. Carrier Class Power over Ethernet system
2.Auto ranging power supply/ inserter
3. Built-in Ethernet surge protection to prevent equipment damageOverload and short circuit protection
4.Minimum cross talk and insertion loss
5.Advanced switching technology - runs cool
6.Passive POE ( Pins 4,5 V+, Pins 7,8 V-) pin definition of CAT-5 Ethernet cable
7.Special design for outdoor networking facility andlow port density installations (use this device indoors only)
8.Plug and Play
9.Compliant with 802.3AF/AT
10. Output: RJ-45 Shielded Jack marked POE Input: RJ-45 Shielded Jack marked LAN 100-240v
11.Power input: jack accepts supplied power cord with USA plug
12.LED: Green Power LED
13.Power: Input: 100-240VAC Output: 24W -1A operation not included
14.Operating temperature: +14 to 140F 10 to 60 C
About this item
Used for 100/1000Mbps networking, easily connect any POE supported device to a non-PoE LAN switch port, Used to connect a wireless access point, IP phone, network camera, or any POE powered device to a LAN switch.
Save you money by using an existing Ethernet line to deliver data and power, reduce Wiring Costs by powering devices through your existing Ethernet line rather than running new AC power lines
You need to do is connect this 24W 0.5A PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device
Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems
It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc, it meet the IEEE802.3 network line power standard, with short circuit, overcurrent and overvoltage protection, safe use
Hot Tags: us plug dc24w poe (power over ethernet) injector, China, manufacturers, suppliers, factory, customized, free sample, made in China
No Information









