Products

24W Wall Mount Over Ethernet Adapter POE Injector

24W Wall Mount Over Ethernet Adapter POE Injector

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Dongguan KaiWin Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of 24w wall mount over ethernet adapter poe injector in China. If you're going to buy bulk high quality products at low price, welcome to get quotation from our factory. Customized orders are welcome.

Description:

Our power supply models enable PoE equipment makers to comply with PoE standards such as IEEE802.3af IEEE802.3at and IEEE802.3bt . Tiger Power and Gospower are worldwide leaders in PoE and networking equipment Power Supplier. We offer a large range of products staring at 18W models up to 1KW at open and enclosed frame, Wall mount and Desktop PoE injectors. many of them are Common Redundant Power Supply – CRPS , Current Sharing and dual output for standby mode.

Product parameters of 24W Wall Mount POE Injector over Ethernet Adapter:

Output	Safe type	GRT-POE15-XXXYYY	GRT-POE15-XXXYYYA	GRT-POE15-XXXYYYA-AF	GRT-POE15-XXXYYYA-AT
	Voltage range	18V、24V、48V、56V	18V、24V、48V、56V	48~56VDC	48~56VDC
	Maximum power	12W	24W	15.4W	24W
	speed	Mbps	Gbps	Gbps	Gbps
	IEEE802.3	Non-standard, no active detection	Non-standard, no active detection	Standard, active detection of 802.3AF	Standard, active detection of 802.3AF
	Voltage accuracy	±5.0%	±5.0%	±5.0%	±3.0%
	Linear adjustment rate	±1.0%	±1.0%	±1.0%	±1.0%
	Load adjustment rate	±5.0%	±3.0%	±3.0%	±2.0%
	Start, rise, hold time	2000ms, 50ms, 10ms /230VAC 3000ms, 50ms, 10ms /115VAC (At full load)
Input	Voltage range	90 ~ 264VAC
	Frequency range		47 ~ 63Hz
	efficiency	84%	84%	84%	84%
	Alternating current	0.8A / 115VAC 0.4A / 230VAC
	Inrush current max.	Cold start 40A / 115VAC 75A / 230VAC
	Leakage current max.	0.25mA / 240VAC
Protect	Excess load	120%~180% of rated output power
		Protection mode: burp mode, automatically recovered after load anomalies are removed

	overvoltage	110%~140% of the rated output voltage
		Turn off the output voltage and restart to restore
Environment	Operating temperature		-10 ~ +50℃ (Please refer to "Decrement curve")
	operating humidity		20 ~ 90% RH, non-condensing
	Store temperature and humidity		-20 ~ +85℃, 10 ~ 95% RH, non-condensing
	Temperature coefficient		±0.03% /℃ (0 ~ 40℃)
	Vibration resistance	10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each
Safety and electromagnetic compatibility	Safety specification		passed GB4943 , GB4706, IEC61558,EN61000-3
	Withstand voltage		I/P-O/P: 3000VAC
	Insulation impedance		I/P-O/P:10M Ohms / 500VDC / 25℃/ 70% RH
	Electromagnetic compatibility generator shoot		Parameter	Standard	Test Level / Note
			Conducted emission	GB17625.1,EN55032	Class B
			Radiated emission	GB/T-9254, EN55024, GB4343, FCC Part 15	Class B
Others	quality guanrantee period		2 years
	MTBF		≥45000 hours

Features of 24W Wall Mount POE Injector over Ethernet Adapter:

Input: 100-240VAC 50/60Hz

Output: 53.5V 0.45A/24V 1A/12V 2A

Output type: 1*RJ45 connector--POE, 1*RJ45 connector--LAN

Output Power: 24W max

Material: Plastic

Certification: CE, CCC

Application of 24W Wall Mount POE Injector over Ethernet Adapter:

This POE Injector can be used to connect a wireless AP, IP phone, network camera, or any 10/100Mbps powered device to a LAN switch. Extend the network and power to areas where no power cords or outlets by using existing Ethernet cable.

Hot Tags: 24w wall mount over ethernet adapter poe injector, China, manufacturers, suppliers, factory, customized, free sample, made in China

24W Wall Mount Over Ethernet Adapter PoE Injector

Wall Plug Power Over Ethernet Adapter 2*10/100Mbps POE RJ45 Injector