60W Passive POE Injector RJ45 Wifi Adapter For CCTV Security Camera VOIP Ethernet Switch Antenna
* Support long distance for data, up to 100meters * Data and Power passed by the ethernet cable * Full protection:Overload/Over current/ Over voltage/ Short circuit
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Dongguan KaiWin Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of 60w passive poe injector rj45 wifi adapter for cctv security camera voip ethernet switch antenna in China. If you're going to buy bulk high quality products at low price, welcome to get quotation from our factory. Customized orders are welcome.
Description:
* Support long distance for data, up to 100meters
* Data and Power passed by the ethernet cable
* Full protection:Overload/Over current/ Over voltage/ Short circuit
Product parameters of 60W Wall Mount over Ethernet Adapter POE Injector:
|
Output |
Safe type |
GRT-480100A |
GRT-560110A |
GRT-560100A |
|
|
Voltage range |
48VDC |
56VDC |
56VDC |
|
|
|
Maximum power |
48W |
60W |
56W |
|
|
|
speed |
Gbps |
Gbps |
Gbps |
|
|
|
IEEE802.3 |
Non-standard, no active detection |
Non-standard, no active detection |
Non-standard, no active detection |
|
|
|
Ripple/Noise |
480mV p-p |
560mVp-p |
560mVp-p |
|
|
|
Voltage accuracy |
±5.0% |
±5.0% |
±5.0% |
|
|
|
Linear adjustment rate |
±1.0% |
±1.0% |
±1.0% |
|
|
|
Load adjustment rate |
±5.0% |
±3.0% |
±3.0% |
|
|
|
Start, rise, hold time |
2000ms, 50ms, 10ms /230VAC |
||||
|
Input |
Voltage range |
90 ~ 264VAC |
|||
|
Frequency range |
47 ~ 63Hz |
||||
|
efficiency |
87% |
87% |
|
|
|
|
Alternating current |
0.8A / 115VAC 0.4A / 230VAC |
||||
|
Inrush current max. |
Cold start 40A / 115VAC 75A / 230VAC |
||||
|
Leakage current max. |
0.25mA / 240VAC |
||||
|
Protect |
Excess load |
120%~180% of rated output power |
|||
|
Protection mode: burp mode, automatically recovered after load anomalies are removed |
|||||
|
overvoltage |
110%~140% of the rated output voltage |
||||
|
Turn off the output voltage and restart to restore |
|||||
|
Environment |
Operating temperature |
-10 ~ +50℃ (Please refer to "Decrement curve") |
|||
|
operating humidity |
20 ~ 90% RH, non-condensing |
||||
|
Store temperature and humidity |
-20 ~ +85℃, 10 ~ 95% RH, non-condensing |
||||
|
Temperature coefficient |
±0.03% /℃ (0 ~ 40℃) |
||||
|
Vibration resistance |
10 ~ 500Hz, 2G 10 minutes/cycle, X, Y, Z axis 60 minutes each |
||||
|
Safety and electromagnetic compatibility |
Safety specification |
passed GB4943 , GB4706, IEC61558,EN61000-3 |
|||
|
Withstand voltage |
I/P-O/P: 3000VAC |
||||
|
Insulation impedance |
I/P-O/P:10M Ohms / 500VDC / 25℃/ 70% RH |
||||
|
Electromagnetic compatibility generator shoot |
Parameter |
Standard |
Test Level / Note |
||
|
Conducted emission |
GB17625.1,EN55032 |
Class B |
|||
|
Radiated emission |
GB/T-9254, EN55024, GB4343, FCC Part 15 |
Class B |
|||
|
Others |
quality guanrantee period |
2 years |
|||
|
MTBF |
≥45000 hours |
||||
Features of 60W Wall Mount over Ethernet Adapter POE Injector:
DEVICE INTERFACE: 1 x 2.5G LAN in port; 1 x 2.5G PoE++ out port.
COMPATIBILITY:Auto-sensing technology delivers up to 90W to a PoE++ device with backwards compatibility for 802.3bt(60w), 802.3at(30w) and 802.3af PoE (15.4W) devices.
POE++: The Gigabit PoE++ Injector converts a non-PoE gigabit port to a PoE++ Gigabit port and supplies PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) to a device.
POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables.
INSTALLATION FLEXIBILITY: Wall-mount design of the PoE++ injector and a sturdy Aluminum enclosure accommodates most installations scenarios.
EASY INSTALLATION: No configuration needed, simply connect a PoE network device to the Power over Ethernet injector.
Application of 60W Wall Mount over Ethernet Adapter POE Injector:
IP Phone, Voip Phone, Wireless Networks Access Points, IP print servers, Blue tooth access points , Security Cameras, smart door system, etc.
Hot Tags: 60w passive poe injector rj45 wifi adapter for cctv security camera voip ethernet switch antenna, China, manufacturers, suppliers, factory, customized, free sample, made in China
You Might Also Like
-

Single-port 10/100/1000Mbps 120W Wall Mount Over Eth...
-

24W Wall Mount Over Ethernet Adapter POE Injector
-

Wall Plug Power Over Ethernet Adapter 2*10/100Mbps P...
-

Gigabit PoE Injector, 802.3af/at/bt 60W
-

GIgabit Power Over Ethernet Active PoE Injector 60W POE
-

US Plug DC24W POE (Power Over Ethernet) Injector


