HDM length limit problem

Sep 15, 2022

The cable length limit of HDMI is one of its main problems. In some consumer self tests, the standard 28AWG (American Wire Gauge) HDMI copper wire began to attenuate after about 5 meters. This length is usually insufficient for the connection between the projector and the computer.

However, the HDMI organization did not recognize this restriction. The HDMI FAQ page of its website recorded that "we have seen cables pass the HDMI" standard cable "commitment test no shorter than 10 meters without a" adapter ".

Most of the existing 10M cables (without HDMI equalizer IC) certified by HDMI are made of 24AWG wire.

Some reports point out that increasing the diameter of copper wire in the cable to reduce the impedance is one of the effective ways to extend the cable length. It is also reported that the performance of 24AWG cable is better than 28AWG cable. In addition, some people use optical fiber or two CAT-5 network cables to replace the standard HDMI copper wire. Some manufacturers also manufacture HDMI signal intensifiers to meet user needs.

A single HDMI equalizer IC can make the maximum length of 24AWG HDMI cable 50 meters.


You Might Also Like