Analysis of SCSI System Structure

Nov 18, 2026

SCSI is a device-independent I/O subsystem that enables the connection of various devices to a computer system. The device independence means that when connecting a certain device, there is no need to know any special information about that device. SCSI can obtain the necessary parameters directly from the device through corresponding commands, so all specific information about the device is placed on the peripheral device. The address of a device on the SCSI bus is called SCSI ID, and each SCSI ID must be unique on the bus. At the same time, the SCSI ID also defines the priority of connecting the device, where SCSI ID 0 has the lowest priority. These devices play the roles of initiator or target on the SCSI bus. The initiator selects a target and sends a command in the form of a SCSI command to trigger an action on the SCSI bus. However, once the command is transmitted, the target gains control of the bus protocol and decides whether to release the bus and when to connect with the initiator. The SCSI host adapter of the computer is a typical initiator, and the SCSI interface hard disk is a typical target.


The structure of the SCSI system shown in Figure SCSI system architecture indicates a simplified SCSI system structure. After the SCSI device of the initiator receives the task issued by the system to execute an I/O process, it transmits it to the target in the form of a SCSI command. The target receives the I/O task and passes it to the corresponding LUN for execution, where LUN represents the physical peripheral device and the logic circuits required to execute the SCSI command. The initiator and target are classified as different roles based on the different roles they play in the I/O task processing. The number of targets that an initiator can control is determined by the data width of the SCSI bus.

OEM VHDCI68 SCSI68 Male To 3/4 VGA Female Splitter Cable

You Might Also Like